Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 311)

Unified IP MIB Reference 285
53-1003106-01
NP QoS statistics table
20
NP QoS statistics table
The brcdNPQosStatTable displays information of Network Processor (NP) QoS-related statistics per
port for per priority.
By default, the SNMP support is disabled. It is recommended to use enable-qos-statistics
command to enable Quality of Service (QoS) accounting and snmp-server enable mib np-qos-stat
command to enable the SNMP support.
Use clear np qos statistics [ ethernet slot/port | pos slot/port | slot slot no ] and clear np qos stats
lag lag_name commands to clear all the CLI and SNMP statistics counters for the NP QoS statistics.
NOTE
The MIB objects in the following table are read-only and support only SNMP GET, GET-NEXT, WALK,
and GET-BULK requests.
The following table contains information of Network Processor QoS-related statistics supported on
the Brocade NetIron XMR and Brocade MLX series devices and the table is not supported on the
Brocade NetIron CES and Brocade NetIron CER series devices.
brcdNPStatsTxCtrlProtocolPkts
brcdIp.1.14.2.1.1.45
Syntax: Counter 64 Read-only Shows the number of control protocol packets sent in
the POS mode.
NOTE: This object is supported only on the POS
interfaces. For other interfaces, this object
returns “0”.
brcdNPStatsTxPOSLinkDrop
brcdIp.1.14.2.1.1.46
Syntax: Counter 64 Read-only Shows the number of packets dropped due to the link
state in the POS mode.
NOTE: This object is supported only on the POS
interfaces. For other interfaces, this object
returns “0”.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
brcdNPQosStatTable
brcdIp.1.14.2.1.1.2 None The NP QoS statistics table.
brcdNPQosStatIfIndex
brcdIp.1.14.2.1.1.2.1.1
Syntax: InterfaceIndex None The ifindex of the interface. The table includes all the interfaces of
the LP modules that are physically present and operationally up and
it also includes all the deployed LAG interfaces.
brcdNPQosStatQosPriority
brcdIp.1.14.2.1.1.2.1.2
Syntax: PriorityTC None The QoS priority associated with the entry. This is a 1-based index.
The priority0 maps to 1, priority1 maps to 2, and so on. The priority
value equal to the nonPriority(128) is not applicable.
brcdNPQosStatIngressPkts
brcdIp.1.14.2.1.1.2.1.3
Syntax: Counter 64 Read-only The number of packets that has arrived on the specified interface
with a DSCP, EXP, or PCP value equal to the value of the
brcdNPQosStatQosPriority object.
brcdNPQosStatIngressBytes
brcdIp.1.14.2.1.1.2.1.4
Syntax: Counter 64 Read-only The number of bytes that has arrived on the specified interface with
a DSCP, EXP, or PCP value in the packet equal to the value of the
brcdNPQosStatQosPriority object.