Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 39)

Unified IP MIB Reference 13
53-1003106-01
RFC 2515: Definitions of Managed Objects for ATM Management
2
RFC 2515: Definitions of Managed Objects for
ATM Management
Only the following object groups from RFC 2515 are supported on devices that support ATM.
ATM interface configuration parameters table
The ATM Interface Configuration Table from RFC 2515 contains the configuration of cell layers on
the ATM interface of a local device. This information is in addition to the information contained in
the ifTable.
The table contains one entry for each ATM interface port. Table 1 has the object identifier for the
atmInterfaceConf table.
ATM interface transmission convergence sub-layer table
The ATM Interface Transmission Convergence sub-layer table from RFC 2515 contains
configuration and state parameters of the ATM interfaces that use the Transmission Convergence
sub-layer for carrying ATM cells over SONET/SDH or DS3.
Table 1 has the object identifier for the
atmInterfaceTC table.
AAL5 virtual channel connection performance
statistics table
The ATM Adaptation Layer Type 5 (AAL5) virtual channel connection performance statistics table
from RFC 2515 contains the performance statistics of a virtual channel connection at the interface
associated with an AAL5 entity in an ATM host or ATM switch.
Table 1 has the object identifier for
the aal5Vcc table.
ifConformance 1.3.6.1.2.1.31.2
ifCounterDiscontinuityGroup
NOTE: Supported on the Brocade NetIron
XMR, Brocade NetIron MLX, Brocade
MLXe, Brocade NetIron CES, and
Brocade NetIron CER series devices.
1.3.6.1.2.1.31.2.1.13
Object group name Object identifier
TABLE 1 Object group names and OIDs
Object group name Object identifier
atmMIB 1.3.6.1.2.1.37
atmMIBObjects 1.3.6.1.2.1.37.1
atmInterfaceConfTable 1.3.6.1.2.1.37.1.2
atmInterfaceTCTable 1.3.6.1.2.1.37.1.4