Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 366)

340 Unified IP MIB Reference
53-1003106-01
RADIUS general group
28
snRadiusKey
brcdIp.1.1.3.12.1.6
Syntax: DisplayString Read-write Shows the authentication key as encrypted text.
This object can have up to 64 characters. A write operation can only
be done if the SET request uses SNMPv3 with data encrypted using a
privacy key.
snRadiusLoginMethod
brcdIp.1.1.3.12.1.7
Syntax: OCTET STRING Read-write Shows the sequence of authentication methods for the RADIUS
server. Each octet represents a method for authenticating the user at
login. Each octet can have one of the following values:
•
enable(1) – Authenticate by the “Enable” password for the
command line interface.
•
radius(2) – Authenticate by requesting the RADIUS server.
•
local(3) – Authenticate by local user account table.
•
line(4) – Authenticate by the Telnet password.
•
tacplus(5) – Authenticate by requesting the TACACS Plus server.
•
none(6) – Do not authenticate.
•
tacacs(7) – Authenticate by requesting the TACACS server.
Setting a zero length octet string invalidates all previous
authentication methods.
snRadiusEnableMethod
brcdIp.1.1.3.12.1.8
Syntax: OCTET STRING Read-write Shows the sequence of authentication methods for the RADIUS
server. Each octet represents a method for authenticating the user
after login, as the user enters the privilege mode of the command
line interface. Each octet can have one of the following values:
•
enable(1) – Authenticate by the “Enable” password for the
command line interface.
•
radius(2) – Authenticate by requesting the RADIUS server.
•
local(3) – Authenticate by local user account table.
•
line(4) – Authenticate by the Telnet password.
•
tacplus(5) – Authenticate by requesting the TACACS Plus server.
•
none(6) – Do not authenticate.
•
tacacs(7) – Authenticate by requesting the TACACS server.
Setting a zero length octet string invalidates all previous
authentication methods.
snRadiusWebServerMethod
brcdIp.1.1.3.12.1.9
Syntax: OCTET STRING Read-write Shows the sequence of authentication methods. Each octet
represents a method for authenticating the user who is accessing the
Web server. Each octet can have one of the following values:
•
enable(1) – Authenticate by the “Enable” password for the
command line interface.
•
radius(2) – Authenticate by requesting the RADIUS server.
•
local(3) – Authenticate by local user account table.
•
line(4) – Authenticate by the Telnet password.
•
tacplus(5) – Authenticate by requesting the TACACS Plus server.
•
none(6) – Do not authenticate.
•
tacacs(7) – Authenticate by requesting the TACACS server.
Setting a zero length octet string invalidates all previous
authentication methods.
Name, OID, and syntax Access Description