Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 156)

130 Unified IP MIB Reference
53-1003106-01
Power supply table
4
Power supply table
The following table applies to the power supply in all products.
Stacking power supply table
The following table shows the status of a power supply on devices that support the stacking
functionality.
NOTE
The objects in the table below are not supported on the NetIron and the FastIron SX devices.
snChasFactoryPartNumber
brcdIp.1.1.1.1.28
Syntax: DisplayString
NOTE: This object is not
supported on the
Brocade FastIron
devices.
Read-only This object displays the factory part number assigned by the
manufacturer.
snChasFactorySerialNumbe
r
brcdIp.1.1.1.1.29
Syntax: DisplayString
NOTE: This object is not
supported on the
Brocade FastIron
devices.
Read-only This object displays the factory serial number assigned by the
manufacturer.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
snChasPwrSupplyTable
brcdIp.1.1.1.2.1 None A table containing power supply information. Only installed power
supplies appear in the table.
snChasPwrSupplyIndex
brcdIp.1.1.1.2.1.1.1
Syntax: Integer32 Read-only The index to the power supply table.
snChasPwrSupplyDescription
brcdIp.1.1.1.2.1.1.2
Syntax: DisplayString Read-only The power supply description. For example, you may see the
description, “right side power supply”. This object can have up to 128
characters.
snChasPwrSupplyOperStatus
brcdIp.1.1.1.2.1.1.3
Syntax: Integer Read-only The status of the power supply:
•
other(1) – Status is neither normal(2) or failure(3). This value is
not used for stackables including FastIron 4802.
•
normal(2)
•
failure(3)