Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 639)

Unified IP MIB Reference 613
53-1003106-01
Route map match configuration table
62
brcdRouteMapMatchValue
(continued)
•
matchIpv4NextHopAclNames(9)—Matches the next hop IPv4
address of the route. Identifies the list of IPv4 standard or
extended ACL names to be matched. The value is the list of ACL
names separated by one or more spaces.
•
matchIpv4NextHopAclNumbers(10)—Matches the next hop
IPv4 address of the route. Identifies the list of IPv4 ACL
numbers to be matched. The value is the list of ACL numbers
separated by one or more spaces.
•
matchIpv4NextHopPrefixList(11)—Matches the next hop IPv4
address of the route. Identifies the list of IPv4 prefix-lists to be
matched. The value is the list of IPv4 prefix-list names
separated by one or more spaces.
•
matchIpv4RouteSourceAclNames(12)—Matches the advertising
source IPv4 address of the route. Identifies the list of IPv4
standard or extended ACL names to be matched. The value is
the list of ACL names separated by one or more spaces.
•
matchIpv4RouteSourceAclNumbers(13)—Matches the
advertising source IPv4 address of the route. Identifies the list
of IPv4 ACL numbers to be matched. The value is the list of ACL
numbers separated by one or more spaces.
•
matchIpv4RouteSourcePrefixList(14)—Matches the advertising
source IPv4 address of the route. Identifies the list of IPv4
prefix-lists to be matched. The value is the list of IPv4 prefix-list
names separated by one or more spaces.
•
matchIpv6AddressAclNames(15)—Matches the IPv6 address of
the route. Identifies the list of IPv6 ACL names to be matched.
The value is the list of ACL names separated by one or more
spaces.
•
matchIpv6AddressPrefixList(16)—Matches the IPv6 address of
the route. Identifies the list of IPv6 prefix-lists to be matched.
The value is the list of IPv6 prefix-list names separated by one
or more spaces.
•
matchIpv6NextHopPrefixList(17)—Matches the next hop IPv6
address of the route. Identifies the list of IPv6 prefix-lists to be
matched. The value is the list of IPv6 prefix-list names
separated by one or more spaces.
•
matchIpv6RouteSourcePrefixList(18)—Matches the advertising
source IPv6 address of the route. Identifies the list of IPv6
prefix-lists to be matched. The value is the list of IPv6 prefix-list
names separated by one or more spaces.
•
matchMetric(19)—Specifies the route metric used to match.
The value is a string representation of the decimal metric. The
SNMP agent does ASCII to integer conversion before using the
value.
•
matchRoutingProtocol(20)—Specifies the routing protocol used
to match. The value is a string representation of one of the
following decimal values: static-BGP(1), iBGP(2), eBGP(3),
non-staticBGP(4), isisLevel1(5), isisLevel2(6), isis(7), rip(8), and
static(9). The other values are not supported. The SNMP agent
does ASCII to integer conversion before using the value.
Name, OID, and syntax Access Description