Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 227)

Unified IP MIB Reference 201
53-1003106-01
Switch port information
8
snSwIfRouteOnly
brcdIp.1.1.3.3.5.1.25
Syntax: Integer Read-write Indicates if Layer 2 switching is enabled on a routing switch port:
•
disabled(0) – Instructs the routing switch to perform routing first. If
that fails, it performs switching.
•
enabled(1) – Instructs the routing switch to perform routing only.
For a Layer 2 switching-only product, reading this object always returns
"disabled". Writing "enabled" to this object takes no effect.
Default: disabled(0)
snSwIfPresent
brcdIp.1.1.3.3.5.1.26
Syntax: Integer
NOTE: This object is not
supported on the
Brocade MLXe,
Brocade NetIron
MLX, and
FastIron devices.
Read-only Indicates if the mini-GBIC optic is absent or present:
•
false(0)
•
true(1)
snSwIfGBICStatus
brcdIp.1.1.3.3.5.1.27
Syntax: Integer Read-only Indicates if the Gigabit port has a GBIC or miniGBIC port:
•
GBIC(1) – GBIC
•
miniGBIC(2) – MiniGBIC
•
empty(3) – GBIC is missing
•
other(4) – Not a removable Gigabit port
snSwIfLoadInterval
brcdIp.1.1.3.3.5.1.28
Syntax: Integer Read-write Shows the number of seconds for which average port utilization should
be calculated.
Valid values: 30 – 300, in 30 second increments.
Default: 300 seconds
snSwIfStatsInFrames
brcdIp.1.1.3.3.5.1.29
Syntax: Counter32
NOTE: This object is
supported on the
Brocade MLX
series, Brocade
NetIron XMR,
Brocade NetIron
MLX, Brocade
NetIron CES,
Brocade NetIron
CER series
devices.
Read-only Shows the total number of packets received on the interface.
snSwIfStatsOutFrames
brcdIp.1.1.3.3.5.1.30
Syntax: Counter32
NOTE: This object is
supported on the
Brocade MLXe,
Brocade NetIron
MLX, Brocade
NetIron XMR,
Brocade NetIron
CES, Brocade
NetIron CER
series devices.
Read-only Shows the total number of packets transmitted out of the interface.
Name, OID, and syntax Access Description