Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 742)

716 Unified IP MIB Reference
53-1003106-01
Proprietary traps
67
Traps for CAM overflow
The following CAM overflow trap is supported only on the Brocade NetIron MLX, Brocade MLXe,
Brocade NetIron XMR, Brocade NetIron CES, and Brocade NetIron CER series devices.
Trap name and
number Varbinds Severity Description
bfdSessUp
brcdIp.3.3.1.0.1 bfdSessDiag - Low
range value
bfdSessDiag - High
range value Notification This notification is generated when the bfdSessState
object for one or more contiguous entries in bfdSessTable
are about to enter the up(2) state from some other state.
The included values of bfdSessDiag must both be set
equal to this new state (for example, up(1)).
The two instances of bfdSessDiag in this notification
indicate the range of indexes that are affected.
NOTE: All the indexes of the two ends of the range can
be derived from the instance identifiers of these
two objects. For the cases where a contiguous
range of sessions has transitioned into the up(1)
state at roughly the same time, the device must
issue a single notification for each range of
contiguous indexes in an effort to minimize the
emission of a large number of notifications. If a
notification has to be issued for just a single
bfdSessEntry, then the instance identifier (and
values) of the two bfdSessDiag objects must be
the identical.
bfdSessDown
brcdIp.3.3.1.0.2 bfdSessDiag - Low
range value
bfdSessDiag - High
range value Notification This notification is generated when the bfdSessState
object for one or more contiguous entries in bfdSessTable
are about to enter the down(4) or adminDown(5) states
from some other state. The included values of
bfdSessDiag must both be set equal to this new state (for
example, down(4) or adminDown(5)). The two instances
of bfdSessDiag in this notification indicate the range of
indexes that are affected.
NOTE: All the indexes of the two ends of the range can
be derived from the instance identifiers of these
two objects. For cases where a contiguous range
of sessions has transitioned into the down(4) or
adminDown(5) states at roughly the same time,
the device should issue a single notification for
each range of contiguous indexes in an effort to
minimize the emission of a large number of
notifications. If a notification has to be issued for
just a single bfdSessEntry, then the instance
identifier (and values) of the two bfdSessDiag
objects must be the identical.
Trap name and number Varbinds Severity Description and trap message
snTrapCAMOverflow
brcdIp.0.1002 snAgGblTrapMessage Alerts Displays the SNMP trap that is generated when
any CAM partition becomes full.
Sample trap message:
CAM partition full