Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 697)

Unified IP MIB Reference 671
53-1003106-01
Virtual server history table
65
Name, OID, and syntax Access Description
snL4VirtualServerHistoryTable
brcdIp.1.1.4.28.6 None Virtual server history table.
snL4VirtualServerHistoryIndex
brcdIp.1.1.4.28.6.1.1
Syntax: Integer Read-only Shows the index entry as identified by
“snL4VirtualServerHistoryControlIndex” .
snL4VirtualServerHistorySampleIn
dex
brcdIp.1.1.4.28.6.1.2
Syntax: Integer Read-only An index that uniquely identifies this particular sample among
all samples associated with the same entry. This index starts at
1 and increases by one as each new sample is taken. There can
be up to 2,147,483,647 samples.
snL4VirtualServerHistoryIntervalSt
art
brcdIp.1.1.4.28.6.1.3
Syntax: Time ticks Read-only The value of sysUpTime at the start of the interval used to
measure data samples.
If the probe keeps track of the time of day, set the data
sampling to start at the beginning of the next hour.
NOTE: Following this rule may require the probe to delay the
collection of the first sample for an entry, because each
sample must be of the same interval. Also, data for the
sample that is currently being collected is not accessible
in this table until the end of its interval.
snL4VirtualServerHistoryReceiveP
kts
brcdIp.1.1.4.28.6.1.4
Syntax: Counter Read-only Shows the number of packets the ServerIron has received from
the virtual server.
snL4VirtualServerHistoryTransmit
Pkts
brcdIp.1.1.4.28.6.1.5
Syntax: Counter Read-only Shows the number of packets the ServerIron sent to the virtual
server.
snL4VirtualServerHistoryTotalCon
nections
brcdIp.1.1.4.28.6.1.6
Syntax: Counter Read-only Shows the total number of client connections on the virtual
server. A connection consists of two sessions: the
client-to-server session and the server-to-client session.
snL4VirtualServerHistoryCurConn
ections
brcdIp.1.1.4.28.6.1.7
Syntax: Integer Read-only Shows the number of client connections currently on the virtual
server. A connection consists of two sessions: the
client-to-server session and the server-to-client session.
snL4VirtualServerHistoryPeakCon
nections
brcdIp.1.1.4.28.6.1.8
Syntax: Integer Read-only Shows the highest number of client connections on the virtual
server. A connection consists of two sessions: the
client-to-server session and the server-to-client session.