Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 635)

Unified IP MIB Reference 609
53-1003106-01
VPLS instance table
61
VPLS instance table
The following table can be used to configure additional virtual circuit properties that are not
supported in vplsConfigTable.
fdryVplsEndPoint2InnerTag
brcdIp.1.2.15.2.2.3.1.3
Syntax: Unsigned32 None This value indicates the inner ID for this endpoint. If the index
fdryVplsEndPoint2InnerTagType has the value isid(3), then this
object will have the ISID value for that endpoint. The valid ISID
value is between 256 (0x100) and 16777214 (0xFFFFFE). If
no inner tag is specified, the value 0 is returned.
fdryVplsEndPoint2IfIndex
brcdIp.1.2.15.2.2.3.1.4
Syntax: InterfaceIndex None This value specifies the ifIndex value of this endpoint.
fdryVplsEndPoint2VlanTagMode
brcdIp.1.2.15.2.2.3.1.5
Syntax: VlanTagMode Read-create This value indicates the VLAN mode for this endpoint. The
values dual(3) and other(4) are not used in this table.
fdryVplsEndPoint2InHCOctets
brcdIp.1.2.15.2.2.3.1.6
Syntax: Counter64 Read-only This counter indicates the number of octets ingressing into this
endpoint from the Customer Edge device. This object is
supported only on the Brocade NetIron CES and Brocade
NetIron CER series devices.
fdryVplsEndPoint2Layer2State
brcdIp.1.2.15.2.2.3.1.7
Syntax: Layer2StateTC Read-only The Layer 2 state of this VPLS endpoint.
fdryVplsEndPoint2OperStatus
brcdIp.1.2.15.2.2.3.1.8
Syntax: PwOperStatusTC Read-only This object indicates the operational status of this endpoint:
•
up(1)
•
down(2)
No other values are used in this table.
fdryVplsEndPoint2RowStatus
brcdIp.1.2.15.2.2.3.1.9
Syntax: RowStatus Read-create This variable is used to create, modify, and delete a row in this
table. When a row in this table is in active(1) state, no objects
in that row can be modified except this object and the
fdryVplsEndPointAdminStatus object.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
vplsConfigIndex
brcdIp.3.4.1.1.2.1.1
Syntax: Unsigned32 None This object is the index for this table.
fdryVplsClassOfService
brcdIp.1.2.15.2.2.2.1.1
Syntax: Unsigned 32 Read-write Indicates the Class of Service for this VPLS instance. This value is
used to select the appropriate tunnel that has a CoS value is less than
or equal to this value.
fdryVplsMaxMacLearned
brcdIp.1.2.15.2.2.2.1.2
Syntax: Unsigned 32 Read-only This value indicates the maximum number of MAC addresses that can
be learned by this VPLS instance. No default value is specified as the
system default can change.