Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 288)

262 Unified IP MIB Reference
53-1003106-01
POS MIB information table
16
snPOSInfo2SSM
brcdIp.1.2.14.1.2.1.6
Syntax: Integer Read-write The Synchronization Status Message (SSM) is sent over the
SONET/SDH line to tell the other end about the quality of the
clock being sent over the line:
•
t1 SonetPrimaryReferenceSource(1) - SONET Primary
Reference Source
•
t1 SonetTraceabilityUnknown(2) - SONET Traceability
Unknown
•
t1 SonetStratum2Traceable(3) - SONET Stratum 2
Traceable
•
t1 SonetTransitNodeClock(4) - SONET Transit Node Clock
•
t1 SonetStratum3eTraceable(5) - SONET Stratum 3e
Traceable
•
t1 SonetStratum3Traceable(6) - SONET Stratum 3
Traceable
•
t1 SonetMinClockTraceable(7) - SONET Minimum Clock
Traceable
•
t1 SonetDus(8) - SONET Do not Use for Synchronization
•
e1 SdhTraceabilityUnknown(9) - SDH Traceability
Unknown
•
e1 SdhSsmTransitNodeClock-g812(10) - SDH Transit
Node Clock G812
•
e1 SdhDus(11) - SDH Do not Use for Synchronization
•
e1 SdhSsmPrimaryReferenceClock-g811(12) - SDH
Primary Reference Clock G811
•
e1 SdhSsmLocalG812(13) - SDH Local G812
•
e1 SdhSsmSyncEquipmentTimingSource(14) - SDH
Synchronization Equipment Timing Source
Default: t1 SonetTraceabilityUnknown(2)
snPOSInfo2Encapsulation
brcdIp.1.2.14.1.2.1.7
Syntax: Integer Read-write Layer 2 encapsulation on the POS interface:
•
ppp(1) - Point to Point Protocol (PPP)
•
chdlc(2) - Cisco High-level Data Link Control (cHDLC)
snPOSInfo2AlarmMonitoring
brcdIp.1.2.14.1.2.1.8
Syntax: Integer Read-write Alarm monitoring on the POS interface:
•
off(0) - Alarm monitoring is off.
•
on(1) - Alarm monitoring is on.
Default: on(1)
snPOSInfo2OverheadJ0Expected
Message
brcdIp.1.2.14.1.2.1.9
Syntax: Octet String Read-write Overhead J0 expected message.
snPOSInfo2OverheadJ0TransmitM
essage
brcdIp.1.2.14.1.2.1.10
Syntax: Octet String Read-write Overhead J0 transmit message.
snPOSInfo2OverheadJ1Expected
Message
brcdIp.1.2.14.1.2.1.11
Syntax: Octet String Read-write Overhead J1expected message.
Name, OID, and syntax Access Description