Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 702)

676 Unified IP MIB Reference
53-1003106-01
WiFi interface table
66
WiFi interface table
The WiFi interface table controls the wireless feature support on a WLAN controller.
Name, OID, and syntax Access Description
wgIfTable
brcdIp.1.1.3.23.2 None WiFi interface table
wgIfIndex
brcdIp.1.1.3.23.2.1.1
Syntax: Integer Read-only The ifIndex value of the switch interface.
wgIfWirelessEnable
brcdIp.1.1.3.23.2.1.2
Syntax: Integer Read-write Enables or disables the wireless feature support on an interface:
•
other(1)
•
enable(2)
•
disable(3)
The default is disable(3).
wgIfPnPLearnNewAP
brcdIp.1.1.3.23.2.1.3
Syntax: Integer Read-write This object is used by the Automatic Discovery and Configuration
(ADC) feature. Enables or disables the ability of an interface to learn
new access points:
•
other(1)
•
enable(2)
•
disable(3)
wgIfAutoPortDisable
brcdIp.1.1.3.23.2.1.4
Syntax: Integer Read-write This object is for the Automatic Port Deactivation feature. If set to
enable, the interface is automatically disabled if the link status of
the interface changes:
•
other(1)
•
enable(2)
•
disable(3)
wgIfVpnPTPolicyId
brcdIp.1.1.3.23.2.1.5
Syntax: Integer Read-write This object binds a VPN Pass through policy to the interface. To bind
an interface to a VPN passthrough policy, enter its policy ID. It must
be a valid policy number that is larger than zero. To unbind an
interface to a VPN passthrough policy, enter zero for the policy ID.
wgIfFullCompRoamingEna
ble
brcdIp.1.1.3.23.2.1.5
Syntax: Integer Read-write Indicates if full compatibility tunneling mode is enabled on the
interface:
•
other(1) – Other.
•
enable(2) – Full compatibility tunneling is enabled.
•
disable(3) – Full compatibility tunneling is disabled. High
performance tunneling is used.