Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 468)

442 Unified IP MIB Reference
53-1003106-01
VSRP virtual router table
44
snVsrpVirRtrPreemptMo
de
brcdIp.1.1.3.21.3.1.1.9
Syntax: Integer Read-write Enables or disables preemption. When preemption is enabled, a
higher priority backup router preempts a lower priority master.
•
disabled(0)
•
enabled(1)
Default: enabled(1)
snVsrpVirRtrState
brcdIp.1.1.3.21.3.1.1.10
Syntax: Integer Read-only Specifies the virtual router’s interface state:
•
init(0) – Initialization state
•
master(1) – Master state
•
backup(2) – Backup state
snVsrpVirRtrIpAddrMask
brcdIp.1.1.3.21.3.1.1.11
Syntax: OCTET STRING Read-write The numbers of IP addresses for this virtual router of this interface.
This object is for Layer 3 VSRP.
Valid values: Up to 64 octets
snVsrpVirRtrActivate
brcdIp.1.1.3.21.3.1.1.12
Syntax: Integer Read-write Indicates if a VRRP or VRRP-E router has been activated.
•
disabled(0) – The router has not been activated.
•
enabled(1) – The router has been activated.
snVsrpVirRtrTrackPortLis
t
brcdIp.1.1.3.21.3.1.1.13
Syntax: OCTET STRING Read-write Specifies the router’s physical track port membership. The
membership includes physical port s and virtual ports whose state is
to be monitored.
Each port index is an ifIndex. If there are four or more consecutive
ifIndexes, then the encoding and decoding scheme is range-based, as
follows:
•
Each range prefix with 0000 (2 octets) is not a valid ifIndex.
•
The first two octets in a set of four octets indicate the beginning of
the range. The next two octets show the end of the range.
•
Ifindexes that are not in a range are displayed as individual
indexes.
For example, you may see the following lists:
•
Port list: 0001..0005 0015 0032..0047
0001..0005 and 0032..0047 show ranges of ifindexes; whereas,
0015 is one ifindex
•
Port list in PDU: 0000 0001 0005 000f 0000 0020 002f
The list contains ifindexes not in a range.
If this object is configured, then the preference level of this interface
will be adjusted dynamically depending on the state of the track port.
The interface's preference level is reduced by the value of preference
level parameter when the track port states first changes from up to
down. When the track port returns to the up state, the interface's
preference level is increased by the amount specified by the
preference level.
snVsrpVirRtrAdvertiseBa
ckup
brcdIp.1.1.3.21.3.1.1.14
Syntax: Integer Read-write Indicates if the ability for this backup to advertise itself to the current
master is enabled:
•
disabled(0)
•
enabled(1)
Default: disabled(0)
Name, OID, and syntax Access Description