Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 419)

Unified IP MIB Reference 393
53-1003106-01
Traffic Manager CPU VOQ information table
39
Traffic Manager CPU VOQ information table
The Traffic Manager CPU VOQ information table is used for profiling the CPU queue size and credit
count at regular intervals. It is advised for the SNMP manager to request the complete row in a
single GET or GET-NEXT request for profiling.
NOTE
The following table displays information about the Traffic Manager CPU queue on the
NI-MLX-1Gx48-T, NI-MLX-1Gx24, NI-MLX-10Gx8, BR-MLX-100Gx2, and all the POS modules.
Name, OID, and syntax Access Description
brcdTMCpuQInfoTable
brcdIp.1.14.2.2.7 None The Traffic Manager CPU VOQ information table.
brcdTMCpuQInfoSlotId
brcdIp.1.14.2.2.7.1.1
Syntax: Unsigned32 None Shows the slot ID of the LP module that uniquely
identifies a line card. The LP module must be physically
present and operationally up.
brcdTMCpuQInfoTMDeviceId
brcdIp.1.14.2.2.7.1.2
Syntax: Unsigned32 None Shows the Traffic Manager device ID that uniquely
identifies the Network Processor Traffic Manager within
a line card in the system.
brcdTMCpuQInfoPriority0QSize
brcdIp.1.14.2.2.7.1.3
Syntax: Unsigned32 Read-only Shows the size of the CPU queue for the priority 0.
brcdTMCpuQInfoPriority0CreditCount
brcdIp.1.14.2.2.7.1.4
Syntax: Unsigned32 Read-only Shows the credit count of the CPU queue for the priority
0.
brcdTMCpuQInfoPriority1QSize
brcdIp.1.14.2.2.7.1.5
Syntax: Unsigned32 Read-only Shows the size of the CPU queue for the priority1.
brcdTMCpuQInfoPriority1CreditCount
brcdIp.1.14.2.2.7.1.6
Syntax: Unsigned32 Read-only Shows the credit count of the CPU queue for the
priority1.
brcdTMCpuQInfoPriority2QSize
brcdIp.1.14.2.2.7.1.7
Syntax: Unsigned32 Read-only Shows the size of the CPU queue for the priority2.
brcdTMCpuQInfoPriority2CreditCount
brcdIp.1.14.2.2.7.1.8
Syntax: Unsigned32 Read-only Shows the credit count of the CPU queue for the
priority2.
brcdTMCpuQInfoPriority3QSize
brcdIp.1.14.2.2.7.1.9
Syntax: Unsigned32 Read-only Shows the size of the CPU queue for the priority3.
brcdTMCpuQInfoPriority3CreditCount
brcdIp.1.14.2.2.7.1.10
Syntax: Unsigned32 Read-only Shows the credit count of the CPU queue for the
priority3.
brcdTMCpuQInfoPriority4QSize
brcdIp.1.14.2.2.7.1.11
Syntax: Unsigned32 Read-only Shows the size of the CPU queue for the priority4.