Teledyne LeCroy STX M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 42)

LeCroy Corporation Viewing Captured Data
40 Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual
Configuration
For special work, you can use the Configuration menu to configure Data Blocks, Software
Settings, and TxVout & Pre‐emphasis (
See “Display Configuration” on page 240 ).
Port Status
You can display an overview of the active ports by clicking the buttons at the bottom right
of the main window (
See “Port Status” on page 211 ).
Statistical Reports
You can generate statistics for all transports, commands, primitives, bus conditions,
addresses, lanes, and errors (
See “Statistical Report” on page 264 ).
Data Report
The data report displays all the data sent from the host to the device and from the device
to the host (
See “Data Report” on page 286 ).
InFusion
The LeCroy InFusion™ Error Injector and Traffic Modifier is an error injector and traffic
modification tool that allows you to verify real‐world fault handling for
Serial Attached SCSI (SAS) and Serial ATA (SATA) systems (
See “InFusion Overview” on
page 307 ).
Trainer
SAS Trainer is a traffic generator that can emulate a SAS initiator/target or 
SATA host/device. Traffic generation enables engineers to test designs under realistic
conditions and to transmit known errors, allowing engineers to observe how devices
handle faulty link conditions.
Traffic generation is performed via the execution of text‐based scripts. These traffic
generation files (*.ssg) contain statements about the types of traffic to be generated.
These script files can be edited with either a simple text editor such as Notepad or with
the Script Editor utility provided by the application.
See “Sierra Trainer Traffic Generation” on page 369 .