Teledyne LeCroy STX M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 388)

LeCroy Corporation Starting the Script Editor
386 Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual
Starting the Script Editor
To edit an .ssg file, use the Script Editor. The Script Edit editing tool displays the .ssg file
and its supporting Include files. The Script Editor utility has several aids to simplify the
process of writing and editing scripts: tool‐tips, drop‐down menus, and colored fields.
The Script Editor example below shows several commented lines followed by some
instructions. The Script Editor has three areas: toolbar (top), script window, and file tabs
(at the bottom of the window). If errors occur, a log opens at the bottom of the window.
Note: If more than one port of Trainer is licensed, you can assign scripts to one or more
ports. See
“Multi‐Port Trainer Script Assignments to Links” on page 389 .
To launch the Script Editor, click the Script Editor button on the toolbar or 
right‐click in the trace window and choose Edit as Text.
Figure 5.12: Script Editor