Viewer setting, Data payload, Time stamp origin – Teledyne LeCroy STX M6-1 SAS_SATA Protocol Analyzer User Manual User Manual

Page 245: Start time and port, Packet view condense mode, Time stamp format, Font

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual

243

Display Configuration

LeCroy Corporation

Viewer Setting

Check the Wrap Packet box to enable the wrapping of packets in the display.

Check the Enable Tooltip box to enable tool tips for packet fields.

Data Payload

You can format the Data Payload display.

For Columns in Row, select 1, 2, 4, 8, or 16.

For Bytes in Column, select 1, 2, 4, 8, or 16.

Time Stamp Origin

Select Absolute, User DEfined, Trigger, or Based on System Time.

Start Time and Port

You can use the same color for the start time and port.

Packet View Condense Mode

You can enable Packet View Condense Mode to minimize Packet View rows.

Time Stamp Format

Select LeCroy, Milliseconds, or Microseconds.

Font

To change display fonts, click the Font button to open the Font dialog box.

Figure 3.69: Font

Choose the font, font style, and size, and click OK.