Teledyne LeCroy STX M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 252)

LeCroy Corporation Display Configuration
250 Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual
Reverse Link Data: The software shows DWORDs of link data as reversed.
Pack Repeated Primitives: The software packs repeated primitives just after opening a
sample file.
Cancel button kills upload immediately: The software kills the uploading process if you
press Cancel.
Close previous sample file when new sample file opens: When you want to open a new
sample file, the software closes any open sample files.
Create statistical report read/write page: The software creates a Read/Write page in the
statistical report. Enabling this setting displays the Read/Write Stream DMA command in
the Read/Write page.
Spread Sheet View Tab
Figure 3.76: SATA: Software Settings Dialog Spread Sheet View Tab
The SAS Software Settings dialog has the same options, except that it does not have
“Show ‘Sector Count’ instead of ‘Xfer Length”.
Color Setting
Based on Cell Type: Each column has its own color.
Based on Port No.: Data of each row are shown based on the specified color for its port.
You can set the color of ports in the Viewer settings.
Based on Read/Write Command Type: You can specify a color for Read commands,
another color for Write commands, and other color for other commands. The software
shows each row based on the command type: Read, Write, or others.