Filter descend packets by ascend packet – Teledyne LeCroy STX M6-1 SAS_SATA Protocol Analyzer User Manual User Manual

Page 226

Text mode
Original mode

LeCroy Corporation

Filtering

224

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual

Figure 3.47: Third Level of Multilevel Filtering

Filter descend packets by ascend packet

You can apply a filter on a descend packet if you check the Filter descend packet if
ascend packet is filtered option. If you uncheck this option, the software only filters the
filtered packet. For example, if this option is checked and any SCSI command is selected,
all transport and link packets of this command are filtered,. If you unchecked this option,
only selected SCSI commands are filtered.