Teledyne LeCroy STX M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 361)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 359
Downloading Scenarios LeCroy Corporation
Downloading Scenarios
After you have created a scenario, you need to download it to the InFusion device for
execution.
If you use a general library as a scenario archive, then the process of creating and
downloading a scenario is as follows:
1. Open the general library (Main library or a File library). Scenarios in the library are
listed in the Main Library window.
2. Open the Device Library window by clicking the Show Device Library button on
application toolbar.
3. Open the Device Library for the device to which you want to download a scenario or
scenarios. You can open the device library in two ways: by clicking the Device Library
icon in the device list window or by double‐clicking the device name.
4. Copy the scenario from general library to device library by dragging it with the
mouse.
5. Download all scenarios in the device library to the InFusion device. To do so, click
the Download all Scenarios button on the Device Library toolbar (second button
from left).
Running Scenarios
If you use a general library as a scenario archive, then the process of executing a scenario
is as follows:
1. Select the scenario to run by clicking it.
2. To run the scenario, click the Run Scenario button on the Device Library toolbar
(second button from the right). The InFusion device then begins its session.