Teledyne LeCroy STX M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 191)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 189
Target and Device Emulation LeCroy Corporation
Project Note
Click the Notes tab and enter a Project Name and a brief description of the Device
Emulation project (see
“Add a Project Note” on page 101 ).
Using the Power Expansion Card
You can use the Power Expansion Card for Emulation. See “Using the Power Expansion
Card” on page 31 .
Run Device Emulation
Click the Activate Device button to start emulation.
You can run the analyzer while device emulation is active to monitor bus traffic.