Teledyne LeCroy STX M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 22)

LeCroy Corporation Installing Your Analyzer
20 Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual
Installing Your Analyzer
Software Installation
The software works on systems using the Windows
®
2000, XP, and Vista operating
systems.
Note on the Windows Vista Operating System: If the SAS or SATA software does not
open, right‐click the SAS Protocol Suite or SATA Protocol Suite icon and select Properties
to display the Properties dialog. Select the Compatibility tab. Check to Run this program
in compatibility mode for Windows XP.
1. Insert the Installation CD ROM into the CD/DVD drive on the host machine.
2. The installation automatically starts setup, unless Auto Run is off. In that case, select
the CD ROM from “My Computer” and click Setup.
3. After the warning to close all other programs and before starting the installation,
the Install component selection opens.
4. Select components for installation.
5. Click Next to complete the installation.
System restart
You must restart your computer before you can use your Analyzer software.
Error Message
If you get an error message during installation of the drivers for Window, consult your
system administrator. Your system may allow only administrator‐level users to copy such
driver files.