Adding an smp command (sas only) – Teledyne LeCroy STX M6-1 SAS_SATA Protocol Analyzer User Manual User Manual

Page 117

Text mode
Original mode

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual

115

Exercise and Capture

LeCroy Corporation

Adding an SMP Command (SAS only)

Click the Insert SMP Command button and choose the command to insert.

Figure 2.94: SAS: SMP Dropdown List

SMP Commands:

Report General
Report Manufacturer Information
Read GPIO Register
Report self‐configuration status
Report zone permission table
Report zone manager password
Report broadcast
Discover
Report Phy Error Log
Report Phy SATA
Report Route Information
Report phy event
Discover list
Report phy event list