Teledyne LeCroy STX M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 138)

LeCroy Corporation Exercise and Capture
136 Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual
Close Connection Setting
Checking Close Connection Settings enables the Error Settings button. Click this button
to display the Close Connection Setting dialog.
Figure 2.132: SAS: Close Connection Settings
Select a Close Sequence Type from the drop‐down list.
Check Delay in Sending to specify the delay in sending Done, Close, or Break.
Select Close Connection Settings from the drop‐down lists.
Store Payload in Buffer
This option is available for read type commands. Choose and specify Data Offset and
Data Length.
Auto Update LBA
Check to enable Auto Update of LBA, then specify the update by checking the option.
Outgoing Open Error
Check Outgoing Open Error and then the enabled Error Settings button to display the
Open Frame Setting dialog.
Figure 2.133: SAS: Open Frame Settings
Check the errors to introduce.
Scroll through the available choices in the Destroy Field of Frame list box and check the
destroy field.