Teledyne LeCroy STX M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 298)

LeCroy Corporation Find Device
296 Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual
Click the Find Device button to search for connected devices. After a brief period, the
dialog displays all device information.
Figure 3.137: SAS: Identified Devices
Click a device in the Device List to display information about that device.
Aliasing
You can enter a 16‐character alias name for a device. In the Device List, right‐click the
device name and enter an alias after the colon.
The alias name appears in the Device List.
Exporting
You can export a device specification to a text file. Click the Export button to open the
Export dialog.
Compliance Test (SATA only)
The Compliance Test consists of a set of selectable tests to verify compliance with the
SATA specification. SATA compliance is at UTD Rev 1.4
Note: The tests follow the LeCroy MOI, which is described in the 
SATA_Digital‐Device_MOI_LeCroy_1.00_UTD1.4.pdf file in the installed Documents directory.