Teledyne LeCroy STX M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 262)

LeCroy Corporation Display Configuration
260 Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual
Enter the Subnet Mask.
Click Update.
The system displays a warning message. Check your entries carefully.
If you do not enter correct data, the program will terminate.
Click Yes to get a success message.
Figure 3.85: SAS IP Setup Success Message
Click OK. The message closes and the device resets.
2. To change back to DHCP, in the IP setup dialog, click the DHCP radio button, then
click Update.
Figure 3.86: SAS IP Setup Success Message
After you see the Warning Message, click Yes
After you see the Success Message, click OK.