Grass Valley EDIUS Pro v.6.5 - Manual (Page 98)

Edit Settings
76 EDIUS - Reference Manual
3
•
Set voice over margins at [Margin] under [Capture].
4 Click [OK].
You can continue to set other items by clicking [Apply].
[Render]
Set the reference of rendering options or the timing to delete rendering files.
1 Click [Settings] on the menu bar, and click [System Settings].
2 Click the [Application] tree, and click [Render].
[Automatic Detection of Capture
Events] Select the conditions for automatically inserting cuts in files at capture
operation. Cut insertion conditions are as follows:
• [At Timecode Break]
• [When Aspect Ratio Changes]
• [When Sampling Rate Changes]
• [When the recorded Time Date Changes]
[When an Event is Detected]
Select how cut positions are processed.
If you select [Divide Files], files are divided at the cut position. If you check
[Group Divided Files as Sequence], multiple divided files are registered to the
bin as a single sequence clip.
If you select [Add Marker], a clip marker is set at the cut position.
[Deck Control after Capture] Select the deck state after capture operation from the list.