Grass Valley EDIUS Pro v.6.5 - Manual (Page 188)

Importing Sources
166 EDIUS - Reference Manual
1 Click the [XDCAM] tree in the folder view of the source browser.
2 Click the drive or reference folder.
The XDCAM sources are displayed in the clip view.
3
•
Reference folders can be temporarily added in the folder view of the source browser. Right-click [XDCAM] and
click [Open Folder].
• When references have been temporarily added in the source browser, they can be deleted by right-clicking a
folder and clicking [Delete]. Actual folders are not deleted.
• To update the information of references, right-click [XDCAM] and click [Refresh]. If it takes time to display the
thumbnail for a clip, press [Esc] on the keyboard to stop refreshing of the list.
3 Select the clip to import, and click [Add and Transfer to Bin] in the source browser.
Data transfer to the PC is started in the background at the same time that the clip is registered to the bin.
Checking the Progress of Background Jobs
0 P168
The clip can be edited with EDIUS even during transfer.
2
Alternative
• Right-click the clip to import, and click [Add and Transfer to Bin] → a clip type.
3
•
Partial transfer is available, where In and Out points are set to files on the XDCAM device and only required
parts are transferred to the hard disk. A message will appear if no connection has been made to the directory
where the high-resolution data is saved when partial transfer is performed on the XDCAM clip. Insert the disk,
and click [OK].
Transferring Only Necessary Parts 0 P171
Importing XDCAM Sources from a Server
Import XDCAM sources via FTP, and register them to the bin.
Import settings can be checked and changed by [Importer/Exporter] in [System Settings]
→ [XDCAM] → [Browser].
XDCAM Browser Settings 0 P85
1
Note
• Set up the FTP server connection in advance.
XDCAM Connection Settings 0 P84
1 Click the [XDCAM] tree in the folder view of the source browser.
2 Click the server.
Information on the server is displayed in the clip view.
3
•
To update the information of the server, right-click the connection destination, and click [Refresh].
3 Select the clip to import, and click [Add and Transfer to Bin] in the source browser.
Data transfer to the PC starts in the background at the same time that the clip is registered to the bin.
Checking the Progress of Background Jobs
0 P168
The clip can be edited with EDIUS even during transfer.
2
Alternative
• Right-click the clip to import, and click [Add and Transfer to Bin] → a clip type.
3
•
Partial transfer is available, where In and Out points are set to XDCAM files on the server and only required
parts are transferred to the hard disk. A message will appear if no connection has been made to the directory
where the high-resolution data is saved when partial transfer is performed on the XDCAM clip. Set up the FTP
connection, and click [OK].
Transferring Only Necessary Parts 0 P171