Grass Valley EDIUS Pro v.6.5 - Manual (Page 217)

195
Bins and Clips
EDIUS - Reference Manual
3 Set each item.
4 Click [OK].
3
•
After setting as a stereoscopic clip, the clip markers which the L side and the R side clips contain are merged.
• The length of the clip will be determined by the area with the frames on both the L side and the R side clips, after
synchronizing the L side and the R side clips.
• The capture margin will be set to the longer one of either the L side or the R side capture margin, after
synchronizing the L side and the R side clips.
• The clip length and information other than the capture margin of the L side clip will be carried over.
• The In and Out points information of the L side and the R side clips will be deleted after setting as a stereoscopic
clip.
Setting Separate L and R Clips in the Bin as Stereoscopic
If both the L side (for left eye) and the R side (for right eye) clips are in the bin, set them as a single stereoscopic clip.
1 Select and right-click the L side and the R side clip (or clips) to set as a stereoscopic clip in the bin, and
click [Set as Stereoscopic].
The [Stereoscopic setting] dialog box appears.
2 Set each item.
3 Click [OK].
3
•
After setting as a stereoscopic clip, the clip markers which the L side and the R side clips contain are merged.
• The length of the clip will be determined by the area with the frames on both the L side and the R side clips, after
synchronizing the L side and the R side clips.
• The capture margin will be set to the longer one of either the L side or the R side capture margin, after
synchronizing the L side and the R side clips.
• The clip length and information other than the capture margin of the L side clip will be carried over.
• The In and Out points information of the L side and the R side clips will be deleted after setting as a stereoscopic
clip.
[Select pair files] Displays the information for the searched files.
If files to be used in pair do not exist, click [Browse folder] to change the
search folder.
Click in [Sync] to select the position to synchronize the L side and the R
side clips. It will be reflected in the [Preview] display.
Every click switches the sorting order to be ascending or descending.
[Preview] Displays the L side clip at the left, and the R side clip at the right. Move the
slider or enter the timecode in [Cur] to view video.
Click [Monitor preview] to view the stereoscopic video of the current position
in the preview window.
Click to switch the L side and the R side video.
[Stereoscopic clips] Displays information on the stereoscopic clip.
The clip name to be created as a stereoscopic clip is displayed in [Clip
Name].
Click in [Sync] to select the position to synchronize the L side and the R
side clips. It will be reflected in the [Preview] display.
When multiple clips of the L and R sides are selected, click [Auto pairing] to
automatically sort them so that clips with high degree of similarity are paired.
[Preview] Displays the L side clip at the left, and the R side clip at the right. Move the
slider or enter the timecode in [Cur] to view video.
Click [Monitor preview] to view the stereoscopic video of the current position
in the preview window.
Click to switch the L side and the R side video.