Multicam mode, Switching to the multicam mode – Grass Valley EDIUS Pro v.6.5 User Manual
Page 325

303
Multicam Mode
EDIUS - Reference Manual
Multicam Mode
Displaying Multiple Clips Simultaneously for Editing
Switching to the Multicam Mode
In the multicam mode, you can play back and edit up to 16 screens of multiple clips simultaneously.
1 Click [Mode] on the menu bar, and click [Multicam Mode].
The preview window switches from the standard mode to the multicam mode.
When the preview window is displayed in the dual mode, the left side is the divided screen corresponding to the number
of cameras, and the right side is the master (selected camera).
When the preview window is displayed in the single mode, the screen is the divided screen corresponding to the
number of cameras. The screen can also be set to display only the master.
Setting the Multicam Display
[Camera mapping] is displayed on the track panel of the timeline window.
2
Alternative
• Switching to the multicam mode:
[F8]
3
•
When the mode is switched to the multicam mode with clips placed on the timeline, the camera switch point is
automatically set to the In and Out points of each clip. To change the camera switch point, overwrite it.
Setting the Camera Switch Point during Playback
• When the preview window is displayed in the single mode, the display can be switched between the selected
camera only display and the divided screen. Click [Mode] on the menu bar, and click [View Multicam]
→ [Show
Only the Selected Camera in Single Monitor Mode].
• The multicam mode can be switched to the standard mode by the following operation.
- Click [Mode] on the menu bar, and click [Normal Mode] or [Multicam Mode].
- Press [F8] on the keyboard again.
- Switching to standard mode:
[F5]
• Operations on clips or tracks in the multicam mode are the same as in the standard mode, however, shortcut
keys differ from those in the standard mode.
1
Note
• The multicam mode ends and the mode changes to the standard mode when the following operations are performed
during multicam editing.
- Switching to the Player during editing in the single mode
- Displaying clips on the Player during editing in the dual mode
- Opening the effect or layouter setting dialog box