K2 ingest setting] dialog box, Batch capturing in k2 clip format, P471 – Grass Valley EDIUS Pro v.6.5 User Manual
Page 493
471
Interaction Function with STRATUS
EDIUS - Reference Manual
• Displaying the device preset assigned to the input preset 3:
[F4]
3 Configure the settings including the save destination and reel name for the source to be captured, and then
click [OK].
When you capture sources from a device that supports deck control by EDIUS, you can operate the camera using the
operation buttons on the Player.
When you capture sources from a device that does not support deck control by EDIUS, proceed to step 5.
4 Play back the source to capture, and set the In and Out points.
5 Click [Capture] on the Player.
The [K2 Ingest Setting] dialog box appears.
6 Change the clip name as necessary.
Capturing starts. The [Capture] dialog box appears.
For a device that supports deck control by EDIUS, capturing ends automatically at the Out point. Click [Stop] in the
[Capture] dialog box to stop capturing halfway through the process. If you want to continue capturing, repeat steps 4
through 6.
For a device that does not support deck control by EDIUS, click [Stop] in the [Capture] dialog box to stop capturing and
stop the playback on the device. If you want to continue capturing, cue up to the part you want to capture and then
repeat steps 5 and 6.
The icon
indicating that the system is generating a file is displayed on the clip that is being captured in the source
browser.
The captured clip is registered in the bin.
2
Alternative
• Press [F9] on the keyboard after step 4.
3
•
During capture, you can add a marker with a comment to the source clip.
• During the capturing process, another EDIUS client on the same network can perform edit while recording by
loading the captured data.
Loading K2 Clip Files to Be Managed by the K2 Media Server
• If you want to change the save destination or reel name halfway through the process, for example, when you
replace the tape, click [Capture] on the menu bar and, click [K2 Ingest Setting].
1
Note
• If only the audio is captured, it is not displayed as a clip in the source browser window. A WAV file is saved in the
project folder.
[K2 Ingest Setting] Dialog Box
0
Batch Capturing in K2 Clip Format
The following explains how to batch capture sources in K2 Clip format.
[Server]
From the list, select the save destination for the source captured in K2 Clip
format.
[Bin]
Displays the list of bins in the save destination you selected in [Server].
Select the bin to register captured clips.
[Reel Name]
To set a reel name, uncheck [Use User Bit as a Reel Name] and enter a reel
name. You can also select the previously entered reel names from the list.