Grass Valley EDIUS Pro v.6.5 - Manual (Page 105)

83
[System Settings]
EDIUS - Reference Manual
2 Click the [Importer/Exporter] tree, and click [MPEG].
3 Set each item.
4 Click [OK].
You can continue to set other items by clicking [Apply].
MXF Connection Settings
Set the connections of FTP servers when outputting in the MXF format.
1 Click [Settings] on the menu bar, and click [System Settings].
2 Click the [Importer/Exporter] tree, and click [MXF] → [FTP Server].
3 Set each item.
The [FTP Server] setting items for MXF are the same as for GXF.
GXF Connection Settings
0 P80
4 Click [OK].
You can continue to set other items by clicking [Apply].
MXF Decoder Settings
You can set the layer and downsample coefficient to be decoded when importing MXF files in the JPEG2000 format.
1 Click [Settings] on the menu bar, and click [System Settings].
2 Click the [Importer/Exporter] tree, and click [MXF] → [Decoder].
3 Set each item.
4 Click [OK].
You can continue to set other items by clicking [Apply].
[P2]
Set the reference folder when source files in P2 devices are imported from the source browser window.
1 Click [Settings] on the menu bar, and click [System Settings].
[Use Accel. Seek] Set faster seeking of MPEG files. To speed up seeking, check this item first,
and then check the following items if necessary.
[Create Seek Information in Background]
Collect the time stamp information of MPEG files at idling to speed up the
seek.
[Save Seek Information to File]
Save the seek information as a reusable file.
[A/V Synchronization Using PTS] Check this item to use the PTS (time stamp information) for synchronization
of audio and video.
[Get Timecode from GOP Header] Some MPEG files may have timecode information in their header. Check this
item to use timecode information.
[Quality] Specify a layer to decode.
[High]
Decode all layers.
[Middle]
Decode half of the layers.
[Low]
Decode single layer.
[Downsampling Ratio] Specify a downsample (scaling) coefficient at decoding.