Grass Valley EDIUS Pro v.6.5 - Manual (Page 453)

431
Exporting in File Formats
EDIUS - Reference Manual
Exporting a Still Image
Export all frames between In and Out points on the timeline as still image files.
1 Click [Other] in the [Print to File] dialog box category tree.
Exporting Files with an Exporter
0 P420
2 Click [Still Image], and click [Export].
3 Specify a file name and export destination, and select the export format.
A sequential number will be added based on the file name entered.
3
•
For example, if “Still1” is entered as the file name, the exported image files will become “Still1”/“Still2”/“Still3”...
and if “Still5” is entered as the file name, the exported image files will become “Still5”/“Still6”/“Still7”..., etc. If a
number is not added at the end of the file name, an 8-digit sequential number will be added automatically.
4 Click [Save between In/Out in sequential files].
The video is exported as still images.
Flash Video (F4V) Export
Projects can be exported in F4V format for Flash.
1 Click [H.264/AVC] in the [Print to File] dialog box category tree.
Exporting Files with an Exporter
0 P420
2 Click [F4V], and click [Export].
The [F4V] dialog box appears.
[F4V] Dialog Box
0 P432
3 After setting the export details, specify a file name and save destination and click [Save].
[Audio settings] [Emphasis]
Select from the list for high-frequency compensation that saves while
emphasizing the high range. With [None], there is no high-frequency
compensation.[50/15 us] is an emphasis setting employed by some audio
CDs, etc. [CCITT J.17] is a telecommunications standard recommended by
CCITT.
[Protection]
The “protection_bit” indicates whether redundancy is added to an audio
stream in order to make error detection and correction possible. Check this
item to change it to “1”, indicating that redundancy is being added. Uncheck
this item to change it to “0”, indicating that redundancy is not being added.
[Original Flag]
Check this item to change the “original_copy” bit to “1”, indicating the original
copy. If it is unchecked, it becomes “0”, indicating a duplication.
[Copyright Flag]
Check this item to change the “copyright” bit to “1”, indicating that the
copyright is protected. If it is unchecked, it becomes “0”, indicating there is no
copyright.
[Advanced] Change the aspect ratio correction or export field settings. The settings for
[Still Image] in [System Settings] will be the initial values.
Exporting a Still Image 0 P431
[Save between In/Out in
sequential files] Export all frames between In and Out points on the timeline as still image
files.