Grass Valley EDIUS Pro v.6.5 - Manual (Page 425)

403
Volume/Pan Adjustment
EDIUS - Reference Manual
3 Click the operation setting for the track for which the volume is to be adjusted, and select an item.
To adjust the volume of an entire track click the master operation setting and click [Master].
To adjust the volume on individual tracks click the operation setting for each track and select what is to be adjusted
([TrackNo] or [Clip]).
To adjust using the learning function, select the learning mode from [Latch], [Touch] and [Write].
4 Move the timeline cursor to the position to start playing, and click [Play] in the [Audio Mixer] dialog box.
5 Drag the fader to adjust volume.
When operating in learning mode points are added to the rubber band of a clip. To redo an adjustment, either overwrite
in [Write] mode or delete an entire rubber band.
Deleting All Rubber Band Points in a Clip
0 P401
2
Alternative
• Volume adjustment (1 dB increments): [↑]/[↓]
• Volume adjustment (0.1 dB increments): [Shift] + [↑] /[Shift] + [↓]
3
•
An optional fader controller can be used to operate the fader. See the manual included with the product for
instructions on use.
[Audio Mixer] Dialog Box
(1) Pan control Control the pan.
(2) [Mute]/[Solo] Toggle mute on a track.
Playing/Muting a Specific Track Only 0 P406
(3) [Gang] Connect to a fader.
Adjusting while Maintaining Volume Difference 0 P405
(4) Level meter Displays a level meter.
(1)
(2)
(3)
(4)
(5)
(7)
(8)
(9)
(6)