Capturing sources all together, Importing sources all together (batch capture), 1 to – Grass Valley EDIUS Pro v.6.5 User Manual
Page 172: P150

Importing Sources
150
EDIUS - Reference Manual
1 Click [Capture] on the menu bar, and click [Select Input Device].
The [Select Input Device] dialog box appears, and the list of the device presets registered in the system settings is
displayed.
2 Select a device preset, and click [OK].
2
Alternative
• Click [Capture] on the menu bar, and click [Device Preset Name] to display the device preset.
• Click the device preset name ([Input Preset 1] to [Input Preset 8]) to display the device preset. (By default, [Input
preset 2] to [Input Preset 8] are not displayed. Before performing the operation, set to display the buttons in the
preview window.)
• Displaying the device preset assigned to the input preset 1:
[F2]
• Displaying the device preset assigned to the input preset 2:
[F3]
• Displaying the device preset assigned to the input preset 3:
[F4]
3 Set the reel name, if necessary.
To set a reel name, uncheck [UserBit is used as a Reel No.] and enter a reel name. You can also select previously
entered reel names from the list.
4 Click [Capture] on the Player.
Capturing starts.
2
Alternative
• Press [F9] on the keyboard after step 3.
5 After finishing capturing necessary parts, click [Stop] in the [Capture] dialog box.
When capturing is stopped, the captured clip is registered to the bin.
1
Note
• The source settings, such as bitrate or frame size, vary depending on your device.
Capturing Sources All Together
Importing Sources All Together (Batch Capture)
The following explains how to determine the directory to capture sources to in advance and import sources all together.
1 Click the [Add to Batch Capture List] list button on the Player.
2 Click [Batch Capture].
The [Batch Capture] dialog box appears.
[Batch Capture] Dialog Box
2
Alternative
• Click [Capture] on the menu bar, and click [Batch Capture].
• Displaying the [Batch Capture] dialog box:
[F10]
3 Select the device preset from the list at [Input Settings].