System settings, Application, Playback – Grass Valley EDIUS Pro v.6.5 User Manual
Page 97: Capture, Appl, Playback] [capture
75
[System Settings]
EDIUS - Reference Manual
[System Settings]
System settings allow you to manage project presets and profiles, set input/output hardware, set input of sources and
input/output of project files, and other operations.
If you use the restricted user profile, the system settings cannot be changed.
The following explains the items that can be set in the system settings.
The settings can be changed even during editing.
[Application]
Set EDIUS operations.
[Playback]
Set playback operations.
1 Click [Settings] on the menu bar, and click [System Settings].
2 Click the [Application] tree, and click [Playback].
3 Set each item.
4 Click [OK].
You can continue to set other items by clicking [Apply].
[Capture]
Set EDIUS capture operations, processing at automatic detection of events, and other operations.
1 Click [Settings] on the menu bar, and click [System Settings].
2 Click the [Application] tree, and click [Capture].
3 Set each item.
[Stop Playback at Frame Drop]
Stop the playback when playback processing cannot keep up with the
playback speed.
[Playback Buffer Size]
Specify the size of the buffer used for realtime playback in MB (megabytes).
[Buffered Frames Before
Playback]
Set the number of frames buffered when starting playback. When playback
stops because it cannot keep up with the speed just after playback is started,
the situation may be improved by increasing the number of frames.
[Margin]
Set the length of the margin added at In and Out points at capture operation.
[Confirm Reel Name Setting after
Setting Device Preset]
After a device preset is selected in the [Select Input Device] dialog box at a
capture operation, the dialog box for setting the reel name appears.
[Confirm File Name at Capture]
Check and set the file name at a capture operation. If you select [Before
Capture], you can set the destination and file name before performing
capture. If you select [After Capture], you can set the destination and file
name after capture is finished.
[Load to Player after Capture]
Play back the file created after capture automatically.
[Correct Audio Errors
Automatically]
Correct audio errors automatically at a capture operation.
[Set file names for 2 file Capture]
If you create 2 files for the L side (for left eye) and the R side (for right eye)
with 2 streams at stereoscopic source capture, set the suffix for the file name
for L and R sides.