Grass Valley EDIUS Pro v.6.5 - Manual (Page 455)

433
Exporting in File Formats
EDIUS - Reference Manual
1
Note
• Depending on the type of save destination, a warning message may be displayed saying that data will become
unrecognizable. Be sure to create a backup before export, as required.
To export to an AVCHD format file without writing to removable media, click [AVCHD] and proceed to step 5.
3 Select [Drive] in [Destination].
The SD memory card or memory stick connected to the PC will be recognized as an external drive.
3
•
You can select [Folder] and click [Select] to export an AVCHD stream to a specific location on the PC.
4 Select [SD Memory Card] or [Memory Stick / HDD Camera] in [Format].
Select according to the media being used.
5 Configure each item in the [Basic Settings] tab and [Extended Settings] tab.
For the setting items, see the descriptions given for the [Basic Settings] tab/[Extended Settings] tab in “Exporting to a
BD Output Format”.
Exporting to a BD Output Format
0 P427
6 Click [OK].
For [AVCHD], set a file name and save destination, and click [Save].
3
•
If a stream file size exceeds 2 GB, it will be split up before export.
Exporting in 3DA1 Format
Projects can be exported in the 3DA1 format to an SD/SDHC memory card. A file can be exported to any desired save
destination.
If exporting to an SD/SDHC memory card, make sure to connect the memory card to the PC before export.
1 Click [AVCHD] in the [Print to File] dialog box category tree.
Exporting Files with an Exporter
0 P420
2 Click [AVCHD (Dual Card 3D) Writer], and click [Export].
3 Set the export destination for the L side and the R side in [Destination 1] and [Destination 2] respectively.
To export to a camera, select [Drive], and set the export destination from the list.
To export to the hard disk on the PC, select [Folder], and click [Select] to set the export destination.
4 Configure each item in the [Basic Settings] tab and [Extended Settings] tab.
For the setting items, see the descriptions given for the [Basic Settings] tab/[Extended Settings] tab in “Exporting to a
BD Output Format”.
Exporting to a BD Output Format
0 P427
5 Click [OK].
Exporting to an SxS Memory Card/SDHC Memory Card
Projects can be exported to an SxS memory card or an SDHC memory card.
Connect a device to the PC, and check the power is turned on.
Files can also be exported to the PC hard disk.
1
Note
• Be sure to format the SxS memory card in advance.
1 Click [XDCAM] in the [Print to File] dialog box category tree.
Exporting Files with an Exporter
0 P420
2 Select an exporter, and click [Export].
Select either [XDCAM EX] or [XDCAM EX DV] as the exporter. Exporters that do not support the project settings will not
be displayed.
3 Set the export destination, quality, metadata, etc., and click [OK].
The setting items will differ depending on the exporter.