Grass Valley EDIUS Pro v.6.5 - Manual (Page 456)

Export of Edited Contents
434 EDIUS - Reference Manual
Example:
If [XDCAM EX] has been selected.
3
•
When exporting has been performed by splitting up the export onto multiple SxS memory cards, the place
exported to will be registered in the bin as sequence clips. However, if one of the SxS memory cards is not
attached during registration, it will not be registered in the bin.
Exporting to a GF Device
You can export a project to a GF device.
Connect the GF device to the PC, and check that the power is turned on.
Files can also be exported to the PC hard disk.
1 Click [GF] in the [Print to File] dialog box category tree.
Exporting Files with an Exporter
0 P420
2 Select an exporter, and click [Export].
Select either [GF clip], [GF clip(DV)], [GF clip(SD)], [GF clip(DVCPRO25)] or [GF clip(DVCPRO50)] as the exporter.
Exporters that do not support the project settings will not be displayed.
3 Set the export destination, BIN to export to, clip name, etc., and click [OK].
The configurable items will differ depending on the exporter.
Example:
If [GF clip] has been selected.
[Destination] Select whether to export to an SxS memory card, to export to an SDHC
memory card or to save to a local folder.
If [Sony - SxS Memory Card] or [JVC - SDHC Memory Card] is selected,
select a card from the list.
If [Automatically select the next card when card is full.] is checked, when free
space runs out on the SxS memory card selected as the export destination,
an SxS memory card with free space will be selected automatically and
exported to. If it is unchecked, a dialog box will be displayed to select the
export destination.
If [Folder] has been selected, click [...] and specify a save destination.
[Segment Encode] Check this item to export a clip of a raw source without re-encoding. This
increases the output speed.
[ClosedGOP] Check this item to complete information within each GOP. Although the
amount of data increases, the video can be re-edited using software that
supports GOP-based editing.
[Audio/Stereo] Check this item to export the audio as a stereo track. This is only displayed
when the audio channel is 2ch.
[Mode] Select an image quality mode (SP or HQ).
[Quality/Speed] Select quality from the list. The higher the quality, the more time it takes to be
encoded.
Metadata Add metadata such as title and comments to clips to be exported.
[Destination] Select whether to export to a GF drive or save to a desired PC folder.
If [GF Drive] has been selected, select a Drive from the list.
If [Folder] has been selected, click [Select] and specify a save destination.
[Bin]
Set the BIN in which to register the exported clip. Select from the list, or click
[Append], enter a BIN title and register anew to the list.
[Clip Title] Enter the name of the clip to be exported.
[Segment Encode] Check this item to export a clip of a raw source without re-encoding. This
increases the output speed.
[Gop Type] Select the GOP type from [I-Frame Only(100 Mbps)] or [Long GOP(50
Mbps)].