Apple Logic Pro 8 User Manual
Page 227
Chapter 10
Working With Instruments and Effects
227
To load a setting:
1
Open the Settings menu (of the plug-in window, not the Channel Strip Settings menu)
by clicking the Settings field.
2
Do one of the following:
 Browse to, and choose the setting you want to use from the menu or category sub-
menus.
 Choose the Load Setting command. When used, a file selector box will open. Only
settings for compatible plug-in types are shown. Each plug-in has its own set of
parameters, and therefore its own file format.
Note: You can also choose plug-in settings from the Library tab of the Media area in
the Arrange window. See “
Using the Library to Choose Plug-in Settings
To choose the next or previous setting, do one of the following:
m
In the plug-in header, click the left arrow to choose the previous setting, or the right
arrow to choose the following setting.
m
Make use of the following key commands:
 Next Plug-in Setting
 Previous Plug-in Setting
 Next Plug-in Setting or EXS Instrument
 Previous Plug-in Setting or EXS Instrument
 Next Channel Strip or Plug-in Setting or EXS Instrument
 Previous Channel Strip or Plug-in Setting or EXS Instrument
To replace a setting, do one of the following:
m
Browse to, and choose the setting you want to use from the Plug-in settings menu.
m
Choose the Load Setting command, and choose the desired setting from the file
selector box.