Bayer HealthCare Rapidlab 800 - Manual (Page 484)

800 Series Operator's Manual 5Ć74
If you do not insert a diskette, the No Diskette in Diskette Drive message box
appears. If you insert an unformatted diskette, the Cannot Write to Diskette
message box appears.
If . . . Then . . .
you want to continue with
the backup insert a formatted diskette and press Continue .
you do not want to continue
with the backup press Cancel . The Cancel Backup screen appears.
If you insert a diskette that already contains data, a message box appears indicating
that the system will overwrite the data currently on the diskette.
If . . . Press . . .
you want to overwrite the
data Continue . The system starts backing up the data.
you do not want to
overwrite the data Cancel . The Backing Up message box appears. Insert a
formatted diskette and press Continue .
Restoring System Data
Use this procedure to copy data from your backup diskettes to the system hard
disk.
CAUTION: When you restore data from a backup diskette, the restore process
replaces any files created since the last back up.
1. Access the Restore screen from the Menu screen:
a. Select 7 System Utilities and press Enter .
b. Select 2 Disk Utilities and press Enter .
c. Select 4 Restore and press Enter .
The Restore screen appears with the Insert Backup Diskette message box.
2. Insert the backup diskette in the diskette drive and press Continue .
The system reads the diskette. When the system is ready, a message box
appears containing backup diskette information. The message also indicates
that the restore process will overwrite the data currently on the hard disk.
3. Press Continue .
The Restoring screen appears with the Reading from Diskette message box.
Procedural
Notes
!
4 2
Menu Code
7