Bayer HealthCare Rapidlab 800 - Manual (Page 435)

System Administration 5Ć25
Turning Off the Paper Spool
Use this procedure to turn the paper spool on or off. The paper spool automatically
winds the roll printer paper as the reports print. The default value is On.
1. Access the Printing Options screen from the Menu screen:
a. Press 5 Operating Setup and press Enter .
b. Press 7 Printing Options and press Enter .
The Printing Options screen appears, as shown in Figure 5-13.
Figure 5Ć13.ā Printing Options Screen
Move to the Paper Spool
frame and select On or
Off.
2. Move to the Paper Spool frame.
3. Select On or Off and press Enter .
4. Press Done .
The next Printing Options screen appears.
5. Press Done again.
6. You are prompted to set up another report.
If you . . . Then . . .
want to set up another report press Yes . The first Printing Options screen
appears.
do not want to set up another
report press No . The Menu screen appears.
want to return to the second
Printing Options screen press Cancel . The second Printing Options
screen appears.
5
Menu Code
7