Bayer HealthCare Rapidlab 800 - Manual (Page 448)

800 Series Operator's Manual 5Ć38
Defining Automatic Transmission of Results
Use this procedure to select automatic transmission of patient sample results
directly to an LIS, HIS, or data management system. You can use this option only
if your 800 system is connected to an LIS or data management system. Refer to
Selecting Automatic Transmission of QC Results, page 5-55, for the procedure to
define auto send for QC results.
Table 5Ć12.āăAuto Send Patient Sample Options
Option Description
On The system automatically sends patient sample results to an LIS or data
management system. The default setting is On.
Off Results are not automatically transmitted. The operator must press Send to
transmit results or press Do Not Send to prevent transmission of results.
1. Access the Systems Options screen from the Menu screen:
a. Select 6 System Setup and press Enter .
b. Select 5 Systems Options and press Enter .
The System Options screen appears, as shown in Figure 5-23.
Figure 5Ć23.ā System Options Screen for an 850
Move to the Auto Send
frame and select
Patient.
2. Move to the Auto Send frame.
3. Select Patient and press Enter .
A dark box indicates the option is on.
4. Press Done .
5. You can define another setup function or press Exit Menu to return to the
Ready screen.
6
Menu Code
5