Bayer HealthCare Rapidlab 800 - Manual (Page 465)

System Administration 5Ć55
5. Define another setup function or press Exit Menu to return to the Ready
screen.
Selecting Automatic Transmission of QC Results
Use this procedure to control transmission of QC results directly to an LIS or data
management system. This option is available only if your 800 system is connected
to an LIS or data management system. Refer to Defining Automatic Transmission
of Results, page 5-38, for the procedure to define patient sample auto send.
Table 5Ć21.āăAuto Send QC Results Options
Option Description
On The system automatically transmits QC results to an LIS or data management
system. The default setting is On.
Off Results are not automatically transmitted. The operator must press Send to
transmit results or press Do Not Send to prevent transmission.
1. Access the Systems Options screen from the Menu screen:
a. Select 6 System Setup and press Enter .
b. Select 5 Systems Options and press Enter .
The Systems Options screen appears, as shown in Figure 5-33.
Figure 5Ć33.ā Systems Options Screen for an 850
Move to the Auto Send frame
and select QC.
2. Move to the Auto Send frame.
3. Select QC and press Enter . A dark box indicates the option is on.
4. Press Done .
5. You can define another setup function or press Exit Menu to return to the
Ready screen.
6
Menu Code
5