Bayer HealthCare Rapidlab 800 - Manual (Page 135)

2Ć37 Operating the System
Figure 2Ć21.ā Patient Data Search Result Screen
Press Reporting Options
to print or transmit this
report.
Press Edit Patient Data
to edit data for this
report.
This line contains the Patient ID,
Sample Source, F
I
O
2
, and
Analysis Date and Time.
5. Edit, print, or transmit the appropriate patient reports.
6. Press Done when you finish.
If . . . Then . . .
more than one sample
is found the Done Options message box appears.
S Select Next Record and press OK to view the next report
that appears on the log.
S Select Previous Record and press OK to view the
previous report that appears on the log.
S Select Search Criteria Screen and press OK to view the
Patient Data Search Criteria screen.
S Press Cancel to close this message box and return to the
Search Results screen.
one sample is found the Patient Data Search Criteria screen appears as shown
in Figure 2-19.
Refer to the following procedures to edit patient data, print the report or the
log, or transmit the report.
If you press Home while in the Patient Data Search Criteria screen, all data is
cleared from the fields and the Ready screen appears.
If you want to recall patient samples for which no fields in the Patient Information
screen were completed, use the sequence number or the date and time of analysis
for the search criteria. View the Patient Data Search Log to locate the sequence
number and date and time of analysis.
If the selected sample has a D code or status message associated with it, the View
Diagnostics F-key appears. Press View Diagnostics
to view the Diagnostics
message box. Scroll through the D codes and messages. Press Cancel when you
finish.
Procedural
Notes