Bayer HealthCare Rapidlab 800 - Manual (Page 133)

2Ć35 Operating the System
Recalling Patient Sample Data
Use this procedure to recall patient sample data and results stored in the system.
When the system locates patient sample data, you can edit data, print reports, and
transmit the data to an LIS or a data management system.
1. Access the Patient Data Search Criteria screen from the Menu screen:
a. Select 4 Data Recall and press Enter .
b. Select 1 Patient Data and press Enter .
The Patient Data Search Criteria screen appears, as shown in Figure 2-19.
Figure 2Ć19.ā Patient Data Search Criteria Screen
Press to recall the last
patient sample analyzed.
This field displays the
number of samples
stored in system.
Type the Patient ID to
locate sample data for a
selected patient.
NOTE:ĄĂ The Analysis Date fields contain the current day’s date. If you do not
complete any other fields, the system recalls all patient samples for this day.
Use this screen to enter the criteria that you want the system to use to search
for patient sample data. The system locates only the samples that meet all the
criteria you specify. For example, if you enter a patient ID, the system searches
for all samples with that patient ID. If you enter a patient ID and an analysis
date, the system searches only for samples with that patient ID and analysis
date. If you do not complete any of the criteria fields, the system recalls all the
samples stored in the system.
2. Type the search criteria and press Enter after you complete each field.
To search . . . Then . . .
for a selected date type the date in both Analysis Date fields.
from the earliest date
to the present date leave the Analysis Date and Analysis Time fields blank.
(Continued)
4
Menu Code
1