Brocade BigIron RX Series Configuration Guide - Manual (Page 889)

BigIron RX Series Configuration Guide 811
53-1002484-04
Displaying OSPF information
26
Note the "" entry appears only during restart. It does not appear once
restart is complete. The restarting router should resync LSDB with its peers when the restart has
completed.
BigIron RX 1# show ip ospf neigh
Port Address Pri State Neigh Address Neigh ID Ev Opt Cnt
3/7 40.0.1.1 1 EXST/DR 40.0.1.3 9.0.1.24 24 2 0
<
in graceful restart state, helping 1, timer 112 sec >
BigIron RX 3# show ip ospf neighbor
Port Address Pri State Neigh Address Neigh ID Ev Opt Cnt
2/2 40.0.10.1 1 EXST/DR 40.0.10.3 8.0.0.23 23 2 0
<
in graceful restart state, helping 1, timer 111 sec >