Brocade BigIron RX Series Configuration Guide - Manual (Page 168)

90 BigIron RX Series Configuration Guide
53-1002484-04
Configuring TACACS and TACACS+ security
3
Syntax: show aaa
The following table describes the TACACS and TACACS+ information displayed by the show aaa
command.
The show web command displays the privilege level of Web Management Interface users.
Syntax: show web
TABLE 37 Output of the show aaa command for TACACS and TACACS+
Field Description
Tacacs+ key The setting configured with the tacacs-server key command. At the Super User
privilege level, the actual text of the key is displayed. At the other privilege levels, a
string of periods (....) is displayed instead of the text.
Tacacs+ retries The setting configured with the tacacs-server retransmit command.
Tacacs+ timeout The setting configured with the tacacs-server timeout command.
Tacacs+ dead-time The setting configured with the tacacs-server dead-time command.
Tacacs+ Server For each TACACS and TACACS+ server, the IP address, port, and the following statistics
are displayed:
opensNumber of times the port was opened for communication with the server
closesNumber of times the port was closed normally
timeoutsNumber of times port was closed due to a timeout
errorsNumber of times an error occurred while opening the port
packets inNumber of packets received from the server
packets outNumber of packets sent to the server
connection The current connection status. This can be “no connection” or “connection active”.
BigIron RX# show aaa
Tacacs+ key: brocade
Tacacs+ retries: 1
Tacacs+ timeout: 15 seconds
Tacacs+ dead-time: 3 minutes
Tacacs+ Server: 207.95.6.90 Port:49:
opens=6 closes=3 timeouts=3 errors=0
packets in=4 packets out=4
no connection
Radius key: networks
Radius retries: 3
Radius timeout: 3 seconds
Radius dead-time: 3 minutes
Radius Server: 207.95.6.90 Auth Port=1645 Acct Port=1646:
opens=2 closes=1 timeouts=1 errors=0
packets in=1 packets out=4
no connection
BigIron RX(config)#show web
User Privilege IP address
set 0 192.168.1.234