Brocade BigIron RX Series Configuration Guide - Manual (Page 1095)

BigIron RX Series Configuration Guide 1017
53-1002484-04
Displaying multi-device port authentication information
32
Displaying authenticated MAC address information
To display information about authenticated MAC addresses on the ports where the multi-device
port authentication feature is enabled, enter the following command.
Syntax: show auth-mac-address
The following table describes the information displayed by the show auth-mac-address command.
Displaying multi-device port authentication configuration
information
To display a summary of multi-device port authentication that have been configured on the device,
enter the following command.
TABLE 160 Output from the show auth-mac-address command
This field... Displays...
Port The port number where the multi-device port authentication feature is
enabled.
Accepted MACs The number of MAC addresses that have been successfully
authenticated
Rejected MACs The number of MAC addresses for which authentication has failed.
BigIron RX# show auth-mac-address
----------------------------------------------------------------------
Port Accepted MACs Rejected MACs
----------------------------------------------------------------------
1/18 1 100
1/20 0 0
1/22 0 0
4/5 0 0