Brocade BigIron RX Series Configuration Guide - Manual (Page 1525)

BigIron RX Series Configuration Guide 1447
53-1002484-04
Multicast (L2)
E
Multicast (L2)
OSPF version 4
Commands See ...
clear ip multicast all | group < group-id> “Clearing IGMP group flows” on page 1163
clear ip multicast statistics “Clearing IP multicast statistics” on page 1163
ip multicast [active | passive] “Enabling IP multicast traffic reduction” on
page 1152
“Changing the IGMP mode” on page 1153
“Enabling PIM SM traffic snooping” on page 1160
ip multicast age-interval < interval> “Modifying the age interval” on page 1154
ip multicast filter “Filtering multicast groups” on page 1155
ip multicast query-interval < interval> “Modifying the query interval” on page 1154
ip pimsm-snooping “Enabling PIM SM traffic snooping” on page 1160
show ip multicast igmp-snooping “Displaying multicast information” on page 1161
show ip multicast pimsm-snooping “Displaying multicast information” on page 1161
show ip multicast statistics “Displaying IP multicast statistics” on page 1162
show ip multicast “Enabling IP multicast traffic reduction” on
page 1152
Commands See ...
area < num> | < ip-addr> nssa < cost> |
default-information-originate
“Configuring an NSSA” on page 764
area < num> | < ip-addr> range < ip-addr> < ip-mask>
[advertise | not-advertise]
“Configuring an address range for the NSSA” on
page 764
“Assigning an area range (optional)” on page 765
area < num> | < ip-addr> stub < cost> [no-summary] “Assign a totally stubby area” on page 762
area < num> | < ip-addr> virtual-link < ip-addr>
[authentication-key [0 | 1] < string>] [dead-interval
< num>] [hello-interval < num>] [md5-authentication
key-activation-wait-time < num> | key-id < num> [0 | 1]
key < string>] [retransmit-interval < num>] [transmit-delay
< num>]
“Modify virtual link parameters” on page 771
area < num> | < ip-addr> virtual-link < router-id>
[authentication-key | dead-interval | hello-interval |
retransmit-interval | transmit-delay
< value> |
[md5-authentication key-activation-wait-time < num> |
key-id < num> [0 | 1] key < string>]
“Assign virtual links” on page 769
area < num> | < ip-addr> “Assign OSPF areas” on page 761
auto-cost reference-bandwidth < num> “Changing the reference bandwidth” on page 777
database-overflow-interval < value> “Modify exit overflow interval” on page 793