Brocade BigIron RX Series Configuration Guide - Manual (Page 795)

BigIron RX Series Configuration Guide 717
53-1002484-04
Configuring MSDP mesh groups
24
Keep Alive Message Received The number of Keep Alive messages the MSDP router has received from
the peer.
Notifications Sent The number of Notification messages the MSDP router has sent to the
peer.
Notifications Received The number of Notification messages the MSDP router has received
from the peer.
Source-Active Sent The number of Source Active messages the MSDP router has sent to the
peer.
Source-Active Received The number of Source Active messages the MSDP router has received
from the peer.
Last Connection Reset Reason The reason the previous session with this neighbor ended.
Notification Message Error Code
Received If the MSDP router receives a NOTIFICATION messages from the
neighbor, the message contains an error code corresponding to one of
the following errors. Some errors have subcodes that clarify the reason
for the error. Where applicable, the subcode messages are listed
underneath the error code messages.
•
1 – Message Header Error
•
2 – SA-Request Error
•
3 – SA-Message or SA-Response Error
•
4 – Hold Timer Expired
•
5 – Finite State Machine Error
•
6 – Notification
•
7 – Cease
For information about these error codes, see section 17 in the Internet
draft describing MSDP, “draft-ietf-msdp-spec”.
Notification Message Error SubCode
Received See above.
Notification Message Error Code
Transmitted The error message corresponding to the error code in the NOTIFICATION
message this MSDP router sent to the neighbor. See the description for
the Notification Message Error Code Received field for a list of possible
codes.
Notification Message Error SubCode
Transmitted See above.
TCP statistics
TABLE 118 MSDP peer information (Continued)
This field... Displays...