Brocade BigIron RX Series Configuration Guide - Manual (Page 1483)

BigIron RX Series Configuration Guide 1405
53-1002484-04
Syslog messages
A
Notification DOT1X issues software but not physical port
up indication of Port
< portnum> to other
software applications
The device has indicated that the specified
port has been authenticated, but the actual
port may not be active.
Notification DOT1X issues software but not physical port
down indication of Port
< portnum> to other
software applications
The device has indicated that the specified is
no longer authorized, but the actual port may
still be active.
Notification Authentication Enabled on < portnum> The multi-device port authentication feature
was enabled on the on the specified
< portnum>.
Notification Authentication Disabled on < portnum> The multi-device port authentication feature
was disabled on the on the specified
< portnum>.
Notification MAC Authentication succeeded for
< mac-address> on < portnum>
RADIUS authentication was successful for the
specified
< mac-address> on the specified
< portnum>.
Informational Cold start The device has been powered on.
Informational Warm start The system software (flash code) has been
reloaded.
Informational < user-name> login to USER EXEC mode A user has logged into the USER EXEC mode
of the CLI.
The
< user-name> is the user name.
Informational < user-name> logout from USER EXEC mode A user has logged out of the USER EXEC
mode of the CLI.
The
< user-name> is the user name.
Informational < user-name> login to PRIVILEGED mode A user has logged into the Privileged EXEC
mode of the CLI.
The
< user-name> is the user name.
Informational < user-name> logout from PRIVILEGED mode A user has logged out of Privileged EXEC
mode of the CLI.
The
< user-name> is the user name.
Informational SNMP Auth. failure, intruder IP: < ip-addr> A user has tried to open a management
session with the device using an invalid
SNMP community string.
The
< ip-addr> is the IP address of the host
that sent the invalid community string.
Informational Interface < portnum>, state up A port has come up.
The
< portnum> is the port number.
Informational Interface < portnum>, state down A port has gone down.
The
< portnum> is the port number.
Informational Interface < portnum>, line protocol up The line protocol on a port has come up.
The
< portnum> is the port number.
Informational Interface < portnum>, line protocol down The line protocol on a port has gone down.
The
< portnum> is the port number.
TABLE 242 Brocade Syslog messages (Continued)
Message level Message Explanation